Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H™ Sintered Superbike Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles.

We took out several other particles which our competitors still use which caused massive disc damage and created our launch material.

• SB101C material
• Lowest BRAKE NOISE
• High HEAT CYCLING CAPABILITY
• Sintered copper alloy engineering
• Long lifetime and ultra high brake effect
• Gives perfect braking in any condition, dry or wet
• EBC Double-H pads are the grippiest street legal brake pads you can buy.

These pads benefit from the highest friction HH rating for maximum stopping power, made from sintered copper alloy like original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold. The unique double segment vented design keeps the pads cooler and prevents pad drag and overheat or fade.

The post BRAKES – FA419HH FULLY SINTERED – EBC (REAR) appeared first on Lbs Pitstop.

Battery Terminals Ring Connector to SAE cable 

• 60CM LONG
• 10A fuse included
• SAE HAS A COVER

Pre-assembled “SAE Connector” battery connection cable for your bike. Once connected, it creates a permanent electrical access point to the battery. When not being used, simply store under the seat

The post BATTERY (RING TERMINAL) TO SAE CONNECTOR (FUSE)-OWN YOUR ADVENTURE appeared first on Lbs Pitstop.

Part Number: JTR1800.43ZBK

T Steel Sprockets are manufactured using only the finest grade of C49 high carbon steel for the rear sprockets, and SCM420 chromoly steel alloy for the front sprockets. The JT Steel Sprockets range now contains over 2,500 parts for all motorcycles and ATVs.

The post Suzuki Hayabusa JT Rear Sprocket appeared first on Lbs Pitstop.

All Balls Racing Dust Seals kits for Dirt Bikes & Motorcycles are manufactured to OEM specifications & tolerances to guarantee quality and superior durability

• Made of high quality Vulcanized Rubber
• Fits as well as OEM
• Three to four times the life than OEM

1. The seal profile is engineered so that each seal lip places equal pressure on the fork tube. Equalized seal pressure creates less drag and longer seal life.
2. The seal incorporates a 3rd seal lip which acts as an additional dust wiper to keep the fork tubes clean off dirt and grit.
3. Dust Seals features external garter springs to keep the fork tubes clean.

Contains

• Each order contains a set of pair for the fork

The post FORK DUST SEAL PAIR (57-102)-ALL BALLS appeared first on Lbs Pitstop.

All Balls Racing Steering Bearing Kits upgrade ball style bearings to heavy duty tapered bearings. Direct replacement for OEM tapered bearings.

• Each kit contains full replacement parts to rebuild each specified steering stem both top and bottom bearing assemblies and seals.

Steering bearing kits are model specific and made to perfectly fit the bike

Compatible with:
BMW RNineT (2014-2016)
BMW RNineT (2017 onward)
BMW S1000 R (2018-2020)
BMW S1000 RR (2016-2018)
BMW S1000 XR (18-19)
Suzuki GSX-R 1000 (2017 onwards
Suzuki Hayabusa (1999 – 2007)
Suzuki Hayabusa (2008-2012)
Suzuki Hayabusa (2013-2020)
Suzuki V-Strom 1000 (2014-2016)
Tiger Explorer 1200 (2014-2016)
Triumph Bobber (2017 Onwards)
Triumph Daytona 675 (13-17)
Triumph Explorer (2016-2021)
Triumph Street Scrambler (2017-2019)
Triumph Street Triple 675 (2013-2016)
Triumph Street Triple 675 R (2014-2016)
Triumph Street Triple S 765 (2017-2020)
Triumph Street Twin (2016-2018)
Triumph Street Twin 900 (2019 onwards)
Triumph T120 (2016 onwards)
Triumph Thruxton 1200 (2017-2020)
Triumph Tiger 800 (2018 onward)
Triumph Tiger 800 XC and XCX (2015-2017)
Triumph Tiger 800 XR & XRX (2015-2017)
Triumph Tiger XC (2011-2014)

The post ALL BALLS RACING Steering Bearing Kit – All Balls Racing -22-1003 SKU:22-1003 appeared first on Lbs Pitstop.

EBC Double-H™ Sintered Superbike Brake Pads deliver high performance and are well known as the EBC flagship sintered street sport brake pad. ECE R 90 brake safety approved and TUV tested, these ultra high friction HH rated brake pads remain a market leader above the rest as nothing else beats the performance of the Double-H™ Sintered Superbike Brake Pad.

Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H™ Sintered Superbike Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles.

We took out several other particles which our competitors still use which caused massive disc damage and created our launch material.

• SB101C material
• Lowest BRAKE NOISE
• High HEAT CYCLING CAPABILITY
• Sintered copper alloy engineering
• Long lifetime and ultra high brake effect
• Gives perfect braking in any condition, dry or wet
• EBC Double-H pads are the grippiest street legal brake pads you can buy.

These pads benefit from the highest friction HH rating for maximum stopping power, made from sintered copper alloy like original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold. The unique double segment vented design keeps the pads cooler and prevents pad drag and overheat or fade.

The post BRAKES – FA447HH FULLY SINTERED – EBC (2 SET FRONT)-EBC appeared first on Lbs Pitstop.

Front & Rear sprockets are Japanese high quality C45 steel manufactured by JT Sprockets

JT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets, SCM420 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

Chain Size:

Chain:- Pitch: 530

The post Suzuki Hayabusa Sprockets – JT Sprockets SKU:JTF423.18 appeared first on Lbs Pitstop.

>SUPERIOR HEAT REDUCTION VS COMPETITION†
>BOIL-OVER PROTECTION TO 253°F
>FREEZE PROTECTION TO -2°F
>PREMIUM CORROSION PROTECTION†
>WITH OAT TECHNOLOGY
>READY TO USE

The post Engine Ice appeared first on Lbs Pitstop.

BMC air filters are produced using a “Full Moulding” system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Technical features
Panel
Outside Width/Base Inner Diameter (mm)
184
Outside Length/Base Outside Diameter (mm)
255

The post BMC Air filter for SUZUKI appeared first on Lbs Pitstop.