• Barkbusters brings you the add-on LED Indicators. These amber LED indicators are designed to retrofit on to Barkbusters STORM, VPS & JET Handguards, adding to your safety and increasing your visibility to oncoming traffic. Each indicator has 15 LEDs each, for maximum visibility. Best when used in combination with the Barkbusters LED Running Lights. In case the flash rate is not correct, it may require an additional resistor set as well

Highlights

• Amber Indicators
• 15 LEDs per side

Required Accessories

• This product consists of LED Indicators ONLY!
• The mount and plastic guard needs to be purchased separately.
• Use our bike filter to find the right mount for you.

What’s in the box?

• LED Indicators x 1 set
• Wiring Harness
• Mounting Hardware
• Mounting Instructions

The post Barkbusters LED Indicators Amber (LED-001-02-AM) appeared first on Lbs Pitstop.

Barkbusters brings you the Bar End Weights. These weights fit on to the bar end side of most Barkbusters mounts, and are designed to reduce vibration in the bars. They add approximately 180g on each side, and this added weight means that there will be a slight improvement in the steering as well

Required Accessories

This product is designed to be used along with Barkbusters Handguards with bar end mounts

Product Specifications 

Color: Black
Weight: 180g per side

What’s in the box?

Barkbusters Bar End Weights x 2
Mounting Hardware
Mounting Instructions

Compatibility Warning

Please take note of the following compatibility warnings –

Handguard     Fitting Notes

BHG-010 – Requires two additional M6x40mm countersunk bolts
BHG-032 – R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 – G650GS requires two additional M6x65mm countersunk bolts
BHG-050 – Will Not fit
BHG-051 – Requires two additional M6x50mm countersunk bolts
BHG-059 – Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 – Will Not fit
BHG-077 – Will Not fit
BHG-080 – Requires two additional M6x45mm flat head bolts
BHG-083 – Requires two additional M6x50mm flat head bolts
BHG-085 – Will Not fit

The post Barkbusters Bar End Weights appeared first on Lbs Pitstop.

Battery Terminals Ring Connector to SAE cable 

• 60CM LONG
• 10A fuse included
• SAE HAS A COVER

Pre-assembled “SAE Connector” battery connection cable for your bike. Once connected, it creates a permanent electrical access point to the battery. When not being used, simply store under the seat

The post BATTERY (RING TERMINAL) TO SAE CONNECTOR (FUSE)-OWN YOUR ADVENTURE appeared first on Lbs Pitstop.

Description

The post Barkbusters – VPS Guard (black on black) appeared first on Lbs Pitstop.

Whether you ride more on rugged terrain, on country roads or in town; a Hepco & Becker guard does the protection for your motorcycle.

Follow the lines of the bike perfectly, giving it a customised appearance.  

Like all Hepco Becker products:- 100% stable tube-in-tube German construction

• 1 Inch bars :- strong enough to protect and still not add weight
• Stress tested for the optimum protections
• Strong sturdy multiple point mounting 
• Premium surface finish of black powder coating
• Easy assembly, instructions included
• High quality german steel tube

The post HONDA TRANSALP XL 750 PROTECTION – ENGINE GUARD appeared first on Lbs Pitstop.

A slight rough contact with the ground and can damage the engine housing of you bike. This skid plate protects the manifold and engine block from violent ground contact or rock impact.

HEPCO BECKER skid plates are designed for protection while making your bike look great!

• Solid premium aluminium skid plate
• 100 % MADE & DESIGNED IN GERMANY
• 3-4mm Thickness of the aluminium
• Perfect blend of gap between the Engine and Skid plate ensuring the the dents are absorbed between the gaps while ensuring the ground clearance is not reduced
• Made and designed as per the lines of the bike
• Adapted to fit the engine and exhaust system of the bike

The post HONDA TRANSALP XL 750 PROTECTION – SKID PLATE appeared first on Lbs Pitstop.

When fully packed or on an unpaved surface, a motorcycle‘s side kickstand can easily sink. A precisely ground extension plate quickly screws onto the side kickstand to prevent this hazard. Contact surface more than 100% larger. External teeth for good grip when unfolding. Easy attachment.

• Modern design by using finest materials
• CNC machine milled aluminium
• Highly scratch resistant, due to hard coat finishing
• Optionally available
• Extension to enlarge shift area

The post SIDE STAND ENLARGEMENT – HONDA (9541) appeared first on Lbs Pitstop.

• High-quality tank protection bars for individualists. Whether you move most of the time in difficult terrain, on the highway or in the city. The body and the tank of your bike are protected at all times effective against anything untoward.
• More than that: at a tipping over or an unintentional contact with the ground, they can keep the driver and the bike from a bigger damage. Also useful when lashing the motorcycle during transport.
• The guard from Hepco & Becker draw the lines of the machine to perfectly and give the bike an individual character. Made of Extremely sturdy tube-in-tube construction. chrome or plastic-coated, depending on the car type steel pipe.
• Protects at Umfallen and falls, useful for lashing the motorcycle
• Vehicle-specific development, thereby matching manufacturing, easy installation
• High-quality metal coating in black, anthracite, silver or white or polished chrome. depending on Comprehensive, easy-to-follow installation instructions

The post HONDA TRANSALP XL 750 PROTECTION – GUARD TANK appeared first on Lbs Pitstop.

Steering Bearings for All Balls

All Balls Racing Steering Bearing Kits upgrade ball style bearings to heavy-duty tapered bearings. Direct replacement for OEM tapered bearings.

• Each kit contains full replacement parts to rebuild each specified steering stem both top and bottom bearing assemblies and seals.

Steering bearing kits are model specific and made to perfectly fit the bike

The post STEERING BEARING KIT (22-1021)-ALL BALLS appeared first on Lbs Pitstop.

• Rugged vehicle accessory mirrors designed to provide the most visibility on the market
• 100% genuine RAM^® components ensure secure connection points and long-term system quality
• Compatible with any RAM^® B size components; double ball and socket technology allows for near-infinite adjustability of your RAM^® mounting system and vibration damping
• Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
• RAM^® mounting components backed by a lifetime warranty

NOTE : ONLY ONE MIRROR.

The post RAM MOUNT- RAM® Tough-Mirror™ Mirrors with Ball appeared first on Lbs Pitstop.