Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H™ Sintered Superbike Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles.

We took out several other particles which our competitors still use which caused massive disc damage and created our launch material.

• SB101C material
• Lowest BRAKE NOISE
• High HEAT CYCLING CAPABILITY
• Sintered copper alloy engineering
• Long lifetime and ultra high brake effect
• Gives perfect braking in any condition, dry or wet
• EBC Double-H pads are the grippiest street legal brake pads you can buy.

These pads benefit from the highest friction HH rating for maximum stopping power, made from sintered copper alloy like original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold. The unique double segment vented design keeps the pads cooler and prevents pad drag and overheat or fade.

The post BRAKES – FA209/2HH FULLY SINTERED – EBC (FRONT) appeared first on Lbs Pitstop.

• Barkbusters brings you the add-on LED Indicators. These amber LED indicators are designed to retrofit on to Barkbusters STORM, VPS & JET Handguards, adding to your safety and increasing your visibility to oncoming traffic. Each indicator has 15 LEDs each, for maximum visibility. Best when used in combination with the Barkbusters LED Running Lights. In case the flash rate is not correct, it may require an additional resistor set as well

Highlights

• Amber Indicators
• 15 LEDs per side

Required Accessories

• This product consists of LED Indicators ONLY!
• The mount and plastic guard needs to be purchased separately.
• Use our bike filter to find the right mount for you.

What’s in the box?

• LED Indicators x 1 set
• Wiring Harness
• Mounting Hardware
• Mounting Instructions

The post Barkbusters LED Indicators Amber (LED-001-02-AM) appeared first on Lbs Pitstop.

Barkbusters brings you the Bar End Weights. These weights fit on to the bar end side of most Barkbusters mounts, and are designed to reduce vibration in the bars. They add approximately 180g on each side, and this added weight means that there will be a slight improvement in the steering as well

Required Accessories

This product is designed to be used along with Barkbusters Handguards with bar end mounts

Product Specifications 

Color: Black
Weight: 180g per side

What’s in the box?

Barkbusters Bar End Weights x 2
Mounting Hardware
Mounting Instructions

Compatibility Warning

Please take note of the following compatibility warnings –

Handguard     Fitting Notes

BHG-010 – Requires two additional M6x40mm countersunk bolts
BHG-032 – R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 – G650GS requires two additional M6x65mm countersunk bolts
BHG-050 – Will Not fit
BHG-051 – Requires two additional M6x50mm countersunk bolts
BHG-059 – Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 – Will Not fit
BHG-077 – Will Not fit
BHG-080 – Requires two additional M6x45mm flat head bolts
BHG-083 – Requires two additional M6x50mm flat head bolts
BHG-085 – Will Not fit

The post Barkbusters Bar End Weights appeared first on Lbs Pitstop.

Battery Terminals Ring Connector to SAE cable 

• 60CM LONG
• 10A fuse included
• SAE HAS A COVER

Pre-assembled “SAE Connector” battery connection cable for your bike. Once connected, it creates a permanent electrical access point to the battery. When not being used, simply store under the seat

The post BATTERY (RING TERMINAL) TO SAE CONNECTOR (FUSE)-OWN YOUR ADVENTURE appeared first on Lbs Pitstop.

Description

The post Barkbusters – VPS Guard (black on black) appeared first on Lbs Pitstop.

All Balls Racing Steering Bearing Kits upgrade ball style bearings to heavy duty tapered bearings. Direct replacement for OEM tapered bearings.

• Each kit contains full replacement parts to rebuild each specified steering stem both top and bottom bearing assemblies and seals.

Steering bearing kits are model specific and made to perfectly fit the bike

Compatible with:
BMW RNineT (2014-2016)
BMW RNineT (2017 onward)
BMW S1000 R (2018-2020)
BMW S1000 RR (2016-2018)
BMW S1000 XR (18-19)
Suzuki GSX-R 1000 (2017 onwards
Suzuki Hayabusa (1999 – 2007)
Suzuki Hayabusa (2008-2012)
Suzuki Hayabusa (2013-2020)
Suzuki V-Strom 1000 (2014-2016)
Tiger Explorer 1200 (2014-2016)
Triumph Bobber (2017 Onwards)
Triumph Daytona 675 (13-17)
Triumph Explorer (2016-2021)
Triumph Street Scrambler (2017-2019)
Triumph Street Triple 675 (2013-2016)
Triumph Street Triple 675 R (2014-2016)
Triumph Street Triple S 765 (2017-2020)
Triumph Street Twin (2016-2018)
Triumph Street Twin 900 (2019 onwards)
Triumph T120 (2016 onwards)
Triumph Thruxton 1200 (2017-2020)
Triumph Tiger 800 (2018 onward)
Triumph Tiger 800 XC and XCX (2015-2017)
Triumph Tiger 800 XR & XRX (2015-2017)
Triumph Tiger XC (2011-2014)

The post ALL BALLS RACING Steering Bearing Kit – All Balls Racing -22-1003 SKU:22-1003 appeared first on Lbs Pitstop.

Protect expensive components and prolong fork life by replacing worn seals.

All Balls Racing Fork Seals & Dust Seal kits for Dirt Bikes & Motorcycles are manufactured to OEM specifications & tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

• Made of high quality Vulcanized Rubber
• Fits as well as OEM
• Three to four times the life than OEM

1. The seal profile is engineered so that each seal lip places equal pressure on the fork tube. Equalized seal pressure creates less drag and longer seal life.
2. The seal incorporates a 3rd seal lip which acts as an additional dust wiper to keep the fork tubes clean of dirt and grit.
3. Dust Seals features external garter springs to keep the fork tubes clean.

Compatible with:
Ducati Evo 848 (2011-2013)
Ducati Monster 796 (2010-2016)
Ducati Panigale 959 (2016-2018)
HD Night Rod (2006 onwards)
Honda CB 1000R (2008-2017)
Honda CB 1000R (2018-2020)
Honda CB 1000R (2021 onwards
Honda CBR 1000 RR Fireblade (2008-2013)
Honda CBR 1000RR ABS Fireblade (2014-2016)
Honda CBR 600 F4I (2003-2006)
Kawasaki Ninja ZX-10R (2011-2015)
Kawasaki Versys 1000 (2019 onwards
Kawasaki ZX-10R (2016-2020)
Suzuki V-Strom 650 (2017 onward)
Triumph Speed Triple (2011-2016)
Triumph Speed Triple (2017 onwards
Triumph Tiger 800 (2018 onward)
Triumph Tiger 800 XR & XRX (2015-2017)

The post ALL BALLS RACING Fork Oil Seal Pair – All Balls Racing SKU:55-120 appeared first on Lbs Pitstop.

• Rugged vehicle accessory mirrors designed to provide the most visibility on the market
• 100% genuine RAM^® components ensure secure connection points and long-term system quality
• Compatible with any RAM^® B size components; double ball and socket technology allows for near-infinite adjustability of your RAM^® mounting system and vibration damping
• Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
• RAM^® mounting components backed by a lifetime warranty

NOTE : ONLY ONE MIRROR.

The post RAM MOUNT- RAM® Tough-Mirror™ Mirrors with Ball appeared first on Lbs Pitstop.

【Power Switch】On/off magnetic switch lip to prevent battery drain (rubber water-resistant cap).

【Safety technology】Certified by RoHS, CE and FCC, USB-IF. The built-in, intelligent multiple protection systems, which protect your devices from over-current, over-charging and over-heating, ensure superior performance, safety and durability.

【Dual, powerful, smart USB ports】 Both the 18W PD USB-C port and 18W Quick Charge 3.0 USB-A port, allow users to simultaneously charge multiple devices in record time, with a total maximum output of 6A/36W (Input: 12-24V), without overloading and slowing down. Perfect for Android and iOS devices!

【Super-efficient charge】The 18W PD port charges the latest USB-C devices faster, including the iPhone 12, by an incredible 50% in 30 minutes; the USB-A port supports the 18W Quick Charge 3.0 with compatible devices. The charging speed is up to 4X faster than standard chargers.

The post HANDLEBAR MOUNTED 36W PD USB-C + QC 3.0 (PLASTIC)-CLIFF TOP appeared first on Lbs Pitstop.

• FCC and CE Approval that Features Built-in Safety Fuse and Auto Shutdown System to Protect Against Shorts and Surges.
• On/Off Magnetic Switch Lip (Rubber Water Resistant Cap) to prevent battery drain

• Input: DC 12-22V, 30V Max
• Output: DC 5V/ 2.5 Amp
• Hi-Speed USB charging ports (Auto Shunt – Can Charge Two Mobile Devices Simultaneously)
• Universal fit for 12-22V Vehicle, Motorcycle, ATV, Boat, Car or Marine.
• Easily installation (Screws Included) !
• The flush mount socket features a dust proof cover

Comes with a plastic Handlebar holder

• Length: 6.5cm
• Width: 4.3cm
• Height: 5.7cm
• Material: High Quality ABS Socket Body

PLEASE NOTE WATER DAMAGES ARE NOT COVERED SO make sure lid is closed accordingly so that there is no water ingress.

The post HANDLEBAR MOUNTED DUAL USB 4A (PLASTIC)-CLIFF TOP appeared first on Lbs Pitstop.